Furuno FR1500 Mk3 - Manual (Page 23)

2-7
6. It is recommended to seal the cable gland with aluminum tape or similar mate-
rial to keep foreign objects out of the display unit.
Figure 2-11 Display unit, rear view
Gyrocompass
1. Slip insulation tubing on VH connector assy. (2 pcs: 03-1763 (5P), 03-1764
(3P).
2. Solder VH connector assemblies to cable MPYC-5 (local supply) form the gyro-
compass.
Figure 2-12 How to attach connector assy. to gyrocompass cable
Connector
Step
Type
Synchro
Type
J4
#1 S1 S1
#2 S2 S2
#3 S3 S3
#4 - -
#5 - -
J5
#1 - R2
#2 COM R1
#3 - -
3. Connect VH connectors to GYRO PROCESSOR Board (64P1106A) as fol-
lows: J4 (5 pin), J5 (3 pin).