Furuno FR1500 Mk3 - Manual (Page 47)

4-15
4.5 RGB BUFFER (External Monitor Interface)
The RGB BUFF Kit provides for connection of an external monitor, and mainly
consists of the RGB BUFF Board. Install the kit as shown below.
Table 4-5 Contents of RGB BUFF Kit OP03-153 (Code no. 008-490-820)
Name Type Qty Code No.
RGB-BUFF Board
(VIDEO INTERFACE Board)
03P9229 1 006-551-050
Coach Clip VJR-3 1 000-111-284
XH Connector Assy. 03-1988 (13-13P) 1 008-490-840
RGB Board Fixing Plate 03-141-1901 1 100-266-730
Panhead Screw M3X8 C2700W 4 000-881-404
1. Unfasten eight screws to remove the cover.
2. Unfasten two screws at the right side of the SPU Board. See the figure below
for location.
Figure 4-17 Display unit, top view
3. Fasten the RGB BUFF Board (supplied) to the fixing plate (supplied) with four
screws (supplied).
Figure 4-18 Attachment of fixing plate
4. Fasten the fixing plate with RGB BUFF Board to the chassis with the screws
removed at step 2.