Frymaster ELECTRIC SERIES OCF30 - Manual (Page 42)

OCF30 ™ SERIES ELECTRIC FRYER
APPENDIX B: Solid Shortening Melter Use
• Ensure shortening melter is on.
• Fill melter with shortening.
• Allow 2-3 hours for solid shortening
to melt. DO NOT attempt to use the
top off system with unmelted oil in
the top off system. The low oil
reservoir display will come on if the
fryer calls for oil before the
shortening in the melter is liquid.
• Once the shortening is fully melted,
press and hold the orange reset
button to reset the display and reset
the top off system.
• DO NOT ADD hot oil to the
shortening melter. The temperature of
the oil reservoir should not exceed
140°F(60°C). Add small amounts of
solid shortening to the reservoir to
ensure it has sufficient oil to operate the
top-off system.
• For best results, DO NOT TURN OFF the solid shortening melter overnight.
• The on/off switch for the melter is also used as a reset switch if the system’s high
limit temperature is reached.
Lift carefully
to add
shortening.
Melter
ON/OFF
switch
Reset oil reservoir system
WARNING
The surfaces of the solid shortening
heater are hot. Do not touch with
bare hands. Wear protective clothing
when adding shortening to melting
unit.