Fortinet 100A - Manual (Page 178)

178
01-28007-0068-20041203 Fortinet Inc.
config router ospf Router
config neighbor
edit <id_integer>
show
end
Example
This example shows how to manually add a neighbor.
config router ospf
config neighbor
edit 1
set ip 192.168.21.63
end
end
This example shows how to display the settings for neighbor 1.
config router ospf
config neighbor
edit 1
get
end
This example shows how to display the configuration for neighbor 1.
config router ospf
config neighbor
edit 1
show
end
Note: Only the ip keyword is required. All other keywords are optional.
neighbor command keywords and variables
Keywords and
variables Description Default Availability
cost
<cost_integer> Enter the cost to use for this neighbor. The
valid range for cost_integer is 1 to
65535.
10 All models.
ip <address_ipv4> Enter the IP address of the neighbor. 0.0.0.0 All models.
poll-interval
<seconds_integer> Enter the time, in seconds, between hello
packets sent to the neighbor in the down
state. The value of the poll interval must be
larger than the value of the hello interval.
The valid range for seconds_integer is 1
to 65535.
10 All models.
priority
<priority_integer> Enter a priority number for the neighbor.
The valid range for priority_integer is
0 to 255.
1 All models.