Fortinet 100A - Manual (Page 220)

220
01-28007-0068-20041203 Fortinet Inc.
IP pool list Firewall
IP pool list
Figure 102:Sample IP pool list
The IP pool list has the following icons and features.
IP pool options
Figure 103:IP pool options
Virtual IP has the following options.
Configuring IP pools
To add an IP pool
1 Go to Firewall > IP Pool.
2 Select the interface to which to add the IP pool.
You can select a firewall interface or a VLAN subinterface.
3 Select Create New.
4 Enter the IP Range for the IP pool.
The IP range defines the start and end of an address range. The start of the range
must be lower than the end of the range. The start and end of the range must be on
the same subnet as the IP address of the interface to which you are adding the IP
pool.
Create New Select Create New to add an IP pool.
Start IP The start IP defines the start of an address range.
End IP The end IP defines the end of an address range.
The Delete and Edit/View icons.
Interface Select the interface to which to add an IP pool.
Name Enter a name for the IP pool.
IP Range/Subnet Enter the IP address range for the IP pool.