Fortinet 100A - Manual (Page 185)

Router config router ospf
FortiGate-100A Administration Guide 01-28007-0068-20041203
185
config redistribute command syntax pattern
config redistribute {connected | static | rip}
set <keyword> <variable>
end
config redistribute {connected | static | rip}
unset <keyword>
end
get router ospf
show router ospf
Example
This example shows how to enable route redistribution from RIP, using a metric of 3
and a route map named rtmp2.
config router ospf
config redistribute rip
set metric 3
set routemap rtmp2
set status enable
end
end
This example shows how to display the OSPF settings.
get router ospf
This example shows how to display the OSPF configuration.
show router ospf
config summary-address
Access the config summary-address subcommand using the config router
ospf command.
redistribute command keywords and variables
Keywords and variables Description Default Availability
metric
<metric_integer> Enter the metric to be used for the
redistributed routes. The
metric_integer range is from 1 to
16777214.
10 All models.
metric-type {1 | 2} Specify the external link type to be used
for the redistributed routes.
2 All models.
routemap <name_str> Enter the name of the route map to use
for the redistributed routes. For
information on how to configure route
maps, see “Route-map list” on page 157 .
No
default.
All models.
status {disable |
enable} Enable or disable redistributing routes. disable All models.
tag <tag_integer> Specify a tag for redistributed routes.
The valid range for tag_integer is 0 to
4294967295.
0 All models.