Fortinet 100A - Manual (Page 202)

202
01-28007-0068-20041203 Fortinet Inc.
Configuring address groups Firewall
Figure 87: Address group options
Address group has the following options:
Configuring address groups
To organize addresses into an address group
1 Go to Firewall > Address > Group.
2 Select Create New.
3 Enter a group name to identify the address group.
4 Select an address from the Available Addresses list and select the right arrow to move
the address into the group.
5 Repeat step 4 as required to add more addresses to the group.
6 Select OK.
To delete an address group
If an address group is included in a policy, it cannot be deleted unless it is first
removed from the policy.
1 Go to Firewall > Address > Group.
2 Select the Delete icon beside the address group you want to delete.
3 Select OK.
To edit an address group
1 Go to Firewall > Address > Group.
2 Select the Edit icon beside the address group you want to modify.
Group Name Enter a name to identify the address group. Addresses, address groups, and
virtual IPs must all have unique names to avoid confusion in firewall policies.
Available
Addresses The list of configured and default firewall addresses. Use the arrows to move
addresses between the lists.
Members The list of addresses in the group. Use the arrows to move addresses
between the lists.