Garland Salamander Broiler - Manual (Page 10)

Part # 4523974 (11/07) Page 10
Model UIR48 – 48” Ranges
DETAIL
I
DETAIL
II
48" RANGE
Figure 2 – With area detail defined for 48 inch ranges .
1 . Remove screws (a total of 10) from back of oven on both
sides of the range (detail I) and center (detail II) as shown
for each range model:
REMOVE
2 SCREWS
BOTH SIDES
REMOVE
1 SCREW
(BOTH SIDES)
DETAIL I
48" RANGES WITH
STANDARD OR CONVECTION OVENS
AND STORAGE
REMOVE
2 SCREWS
(BOTH SIDES)
REMOVE
1 SCREW
(BOTH SIDES)
DETAIL I
FOR 48" RANGES
WITH 2 SPACE SAVER OVENS
REMOVE
2 SCREWS
REMOVE
2 SCREWS
IF REQUIRED
REMOVE
2 SCREWS
REMOVE
2 SCREWS
(IF REQUIRED)
DETAIL II 48" RANGES
WITH STANDARD OVEN AND STORAGE
DETAIL II 48" RANGES
WITH CONVECTION OVEN AND STORAGE
REMOVE
2 SCREWS
REMOVE
2 SCREWS
DETAIL II
FOR 48" RANGES
WITH 2 SPACE SAVER OVENS
2 . For all 48” ranges install the left and right support
brackets (part # 4523226 and 4523227) by re-inserting
the 2 screws removed in step 1 and one additional screw
(on both sides of the range) .
DETAIL I
ALL 48" RANGES
INSERTED
SCREWS
INSTALLATION Continued