GCC Printers 16 - Manual (Page 106)

4-8 GCC Elite Color 16 Series User’s Guide
Clearing Paper Jams
Paper jams in the fuser unit:
Follow the procedure below to remove paper jammed in the fuser unit.
1. Press button ‘B’
➀
and open the upper part of the front cover
➁
.
2. Lift the levers at both ends of the fuser unit, and remove the jammed paper. If the paper is
torn, remove any scraps of paper remaining inside the printer.
NOTE: During operation, the fuser unit (heater) becomes very hot. To prevent burns, do not touch it with
your bare hands.
Completely push down the levers at both ends of the fuser after removing the jammed paper.
3. If you cannot see the jammed paper, it may be jammed around the drum cartridge. Refer
to
“Paper jams around the drum cartridge” on page 4-7 to remove the jammed paper.