Loading transparancies in the multi-purpose tray – GCC Printers 16 User Manual
Page 70
GCC Elite Color 16 Series User s Guide
2-17
Loading Paper
NOTE:
Do not use paper that is folded, creased, or heavily warped.
Do not overload the paper tray.
5.
When loading paper, carefully align the paper guides with the edges of the paper so that
there is a small gap between the paper stack and the guides. Pushing the paper guides too
hard against the edge of the paper stack can warp the paper and cause paper jams.
Load the paper so that it is straight in the tray.
NOTE:
If the paper is not loaded correctly, the printing position may shift and cause incorrect printing.
Loading Transparency Sheets in the Multi Purpose Tray (Tray 1)
Feed transparency sheets from Tray 1. Use only monochrome transparency sheets (see note).
NOTE:
Use only the recommended types of transparency sheet. Do not use any other types, such as color
transparency sheets (bordered by a white frame).
NOTE:
Remove each transparency sheet from the face down tray as soon as it is ejected. If transparency
sheets are allowed to accumulate in the face down tray, static electricity can build up and cause a
jam.