Solving printer power-on problems – GCC Printers 16 User Manual

Page 94

Advertising
background image

GCC Elite Color 16 Series User’s Guide

3-11

Solving Printer Power-on Problems

Solving Printer Power-on Problems

This section describes problems that can occur when starting up the printer. If the trouble per-
sists after performing the checks listed below, turn the printer off [

O

], disconnect the power

cord from the AC outlet, and see

“ Appendix A

General Information”

to arrange for a technical

support or service or repair call.

CAUTION: To prevent the risk of fire or smoke generation, do not attempt to modify the
printer in any way.

WARNING: Before cleaning the printer or performing any other maintenance, be sure to turn
the printer off [

O

], and disconnect the power cord from the AC outlet to prevent the risk of

electric shock.

DESCRIPTION

POSSIBLE

CAUSE

REQUIRED

ACTION

No power.

Power switch not turned
on. Switch is not set to
[

I

].

Check power switch. See

“Chapter 1 Unpacking and
Installing the Printer”

for more

information

Power cord not properly
plugged into AC outlet or
AC connector on rear of
printer

Set power switch to [

O

] (off)

and plug in power cord firmly.
See

“Chapter 1 Unpacking and

Installing the Printer”

for more

information.

Voltage of AC power line
not correct.

Verify that AC outlet is rated for
the correct voltage and amperage
of your printer. See

“Chapter 1

Unpacking and Installing the
Printer”

for more information.

Power is frequently
interrupted

Printer is defective

Turn printer off [

O

], disconnect

power cord from the AC outlet.
See

“Appendix A General

Information”

to arrange for a

technical support or service or
repair call.

Advertising