GCC Printers 16 User Manual
Page 18
10
GCC Elite Color 16 Series User’s Guide
Safety Precautions
Never touch a labeled area found on or near the fuser unit. You can burn yourself. If a
sheet of paper is wrapped around the fuser roller, do not try to remove it by yourself, as
this may cause injuries or burns. Turn off the printer immediately and contact your
GCC Customer Support Center.
Do not place any heavy objects on the printer. An off-balance printer can fall over or the
heavy object can fall, causing injuries.
Do not use highly flammable sprays or solvents in or around the printer, as this can
result in fire.
When removing paper jams, make sure no pieces of paper are left inside the printer, as
this can cause fire. If the paper is wrapped around the fuser or roller, or you cannot see
the jam you are trying to clear, do not attempt to remove the paper by yourself, as this
may cause injury or burns.Turn off the printer immediately, and contact the place of
purchase or a GCC Customer Support Center.
Do not place magnets near the printer. Magnets can activate the printer accidentally,
resulting in injuries.
Refer to this manual for procedures on clearing paper jams and how to resolve any
other troubles that may occur.