GCC Printers 16 - Manual (Page 14)

6 GCC Elite Color 16 Series User’s Guide
Safety Precautions
When lifting the printer, get a firm footing and bend your knees to avoid possible inju-
ries to your back.
The printer has ventilation holes on the rear panel. Ensure that the printer is installed no
less than 6 inches (150 mm) from the wall on the right, 4 inches (100 mm) from the
wall on the left, and 8 inches (200 mm) from the wall at the back. A poorly ventilated
printer can cause excessive internal heat and fire. The accompanying diagram shows
the minimum clearances required for normal operation, consumables replacement, and
maintenance to ensure your printer operates at peak performance.
When moving the printer, be sure to unplug the power cord from the outlet. If the
printer is moved with the power cord connected, it can cause damage to the cord, which
could result in fire or electric shocks.
When moving the printer, do not tilt it more than 10 degrees. If tilted excessively, the
printer may fall over and cause injuries.
OK
√
NO
There is danger of the printer falling.
4” (100mm ) 8” (200mm)
6” (150mm )
24” (600mm)