GCC Printers 16 User Manual
Page 66
GCC Elite Color 16 Series User’s Guide
2-13
Loading Paper
NOTE:
Make sure that the end guide is properly inserted into the holes corresponding to the appropriate
paper size.
Only a small amount of movement of the end paper guide can make automatic paper size detection
impossible. If this occurs, move the end paper guide all the way to its outermost position again, then
realign it with the appropriate paper size mark.
To set A5 paper, use the provided A5 spacer.
•
Remove the A5 spacer from the tray.
•
Set the end guide into the appropriate paper size mark, and then insert the A5 spacer in front of
the end guide.
5.
Align the four corners of the paper stack and insert the paper (print side up) under the tab.
NOTE:
Do not use paper that is folded, creased, or heavily warped.
Do not overload the paper tray.
6.
Align the side guides with the edges of the paper.