Transporting the printer – GCC Printers 16 User Manual
Page 77
2-24
GCC Elite Color 16 Series User’s Guide
Transporting the Printer
Transporting the Printer
Before transporting the printer by car or truck over long distances, follow the procedure below
to prevent strong vibrations from damaging the printer.
NOTE:
When carrying the printer, keep it level to prevent trays or consumables from falling out. Do not tilt
it more than 10 degrees in any direction.
Do not remove the toner cartridges before moving the printer. Toner may spill inside the printer and
damage it.
When the optional High Capacity Feeder is installed, remove it before transporting the printer. If the
High Capacity Feeder is not removed, it may fall, resulting in damage or injury. To remove the High
Capacity Feeder, refer to
Chapter 6 “Options”
.
CAUTION:
•
Because the printer weighs 76 lb. (34.5 kg) fully assembled, make sure that at least two people carry
it.
•
To lift the printer, face the front and back of the printer and grip the recessed areas at the bottom left
and right with both hands. Never try to lift the printer by gripping any other areas. Lifting the
printer by gripping other areas can cause the printer to fall, resulting in injury.
•
Bend your knees when lifting the printer to avoid back injuries.
OK
√
NO
There is danger of the printer falling.