GCC Printers 16 - Manual (Page 43)

GCC Elite Color 16 Series User’s Guide 1-23
Installation Procedure
Installing the Tray Cover
Follow the procedure below to install the tray cover.
NOTE: The tray cover does not come standard with the printer.
1. Clip the hooks on the tray cover onto the 2 tabs at the back of the printer as illustrated.
Connecting the Power Cord
Follow the procedure below to connect the power cord.
1. Plug the power cord into the power inlet at the back of the printer. Plug the other end of
the cord into the AC outlet.
WARNING: Connect the power plug to an AC outlet with the same voltage as the printer (110
or 220V), and rated for at least 15A. No other devices should be plugged to this AC outlet, as
overheating could cause fire or electrical shock.