Multi-Tech Systems ISI5634PCI/4/8 - Manual (Page 12)

12
ISI5634PCI/4/8 User Guide
Introduction
Included in this chapter are two sets of instructions for installing the
Multi-Tech ISI5634PCI card in your PCI bus personal computer. The
first set of instructions is for installing the ISI5634PCI card. The second
set contain instructions for installing the ISI5634PCI card and the
auxiliary module.
Safety Warnings Telecom
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jacks are
specifically designed for wet locations.
3. This product is to be used with UL and CUL listed computers.
4. Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
5. Use caution when installing or modifying telephone lines.
6. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electrical shock from
lightning.
7. Do not use the telephone to report a gas leak in the vicinity of that
leak.
8. To reduce the risk of fire, use only No. 26 AWG or larger
Telecommunication line Cord.
Hardware Installation Procedures
Installing the ISI5634PCI card WITHOUT the auxiliary
module:
1. Before handling the ISI5634PCI, discharge any static in your body
by touching a piece of grounded metal such as the computer
chassis.
2. Carefully remove the ISI5634PCI from its antistatic bag, handling it
only by the mounting bracket and edges. Do not touch the gold-
plated connectors along the bottom edge. (You may want to save
packaging for possible future use.)
3. Visually inspect the ISI5634PCI card. If you have any concerns
about its condition, call Technical Support at 800-972-2439.