Multi-Tech Systems ISI5634PCI/4/8 - Manual (Page 42)

42
ISI5634PCI/4/8 User Guide
Removing ISI5634PCI Driver in Windows NT 3.51/4.0
1. Click Start, Settings, Control Panel, and then double-click
Network.
2. The Network dialog box appears. Click the Adapters tab.
3. Select Multi-Tech 4, 8, 16-port ISI Card, and then click Remove.
4. To complete an uninstall, reboot your computer.
ISI5634PCI Software Installation Procedure
for Windows 95/98/Me
1. Turn off the PC.
2. The ISI5634PCI card must be installed in an expansion slot in the
computer. If not, follow the computer manufacturer's instructions
concerning installation of expansion cards. Install the ISI5634PCI
card in an available PCI expansion slot. Observe standard
precautions regarding electro-static discharge (ESD) when
handling the ISI board (the board should be kept in its shipping
bag until used). During installation, handle the ISI circuit card by
its edges and keep one hand in contact with the PC chassis.
3. Turn on the PC and start Windows 95/98/Me.
4. Windows will autodetect the ISI5634PCI card. When the Add New
Hardware Wizard screen appears, click Cancel.
5. Insert the MultiTech ISI driver CD-ROM into the CD-ROM drive.
(If driver was downloaded from MultiTech web site and placed on
a diskette, insert diskette into floppy drive now.)