Multi-Tech Systems ISI5634PCI/4/8 - Manual (Page 58)

58
ISI5634PCI/4/8 User Guide
printing). Specify a unique printer base name (printer parameters
are outlined in the Multi_Setup Utility section in this manual ).
Printer base name selected: _________________
When you have specified the device base name and the printer
base name, press ENTER to continue.
4. The confirmation screen lists the values you have selected. The
following text appears on the screen (default values are shown):
You have chosen the following setup
The tty prefix is ttyl.
The printer prefix is prnl.
Number of Multi_View pseudo devices
[ user-specified number ].
If these values are correct, type
Y
and the installation process will
continue. If there is an error in any of the values displayed, type
N
and the first screen displays. Then re-enter the information for
each card.
When you accept the confirmation list (by typing Y), a series of
messages displays while the driver is being installed and the kernel
rebuilt. After the terminals have been added to the Terminal
Control database, and when the display says “
Press
<Enter> to continue
:”, then press ENTER . When
Installation complete
displays, press ENTER
again.
5. Select
Host
and press ENTER . Remove diskette from the drive.
6. Select
Exit
and press ENTER .
7. To reboot the system (required), enter the following commands:
Type
shutdown -g0-y
and press ENTER
OR
Type
init 6
and press ENTER .
Driver installation for the ISI5634PCI card now is complete.