Multi-Tech Systems ISI5634PCI/4/8 - Manual (Page 87)

87
Chapter 4—AT Commands, S-Registers, Result Codes
Command: \Kn Break Control
Values: n = 0–5
Default: 5
Description: Controls the response of the modem to a break received
from the computer, the remote modem, or \B command.
Response is different for each of three different states.
Data mode. The modem receives the break from the
computer:
\K0 Enter online command mode, no break sent to the re-
mote modem.
\K1 Clear data buffers and send break to the remote modem.
\K2 Same as \K0.
\K3 Send break immediately to the remote modem .
\K4 Same as \K0.
\K5 Send break to the remote modem in sequence with the
transmitted data.
Data mode. The modem receives the break from the re-
mote modem:
\K0 Clear data buffers and send break to the computer.
\K1 Same as \K0.
\K2 Send break immediately to the computer.
\K3 Same as \K2.
\K4 Send break to the computer in sequence with the re-
ceived data.
\K5 Same as \K4.
Online command mode. The modem receives a \Bn
command from the computer:
\K0 Clear data buffers and send break to the remote modem.
\K1 Same as \K0.
\K2 Send break immediately to the remote modem.
\K3 Same as \K2.
\K4 Send break to the remote modem in sequence with the
transmitted data.
\K5 Same as \K4.