Multi-Tech Systems ISI5634PCI/4/8 - Manual (Page 41)

41
Chapter 3—Software/Driver Installation
11. The Remote Access Setup dialog box displays again. Repeat
steps 9 and 10 until all modems are added.
12. When all modems have been added, click Continue.
13. After bindings have been reviewed and stored, you will be
prompted to re-start your computer. Click Yes.
You have completed installation of modems to COM ports and
configuration of RAS in Windows NT.
Note: By default, Microsoft sets the serial baud rate at 57,600
bps. For improved performance, you can raise the serial baud
rate. To do so, go to Start | Settings | Control Panel. Click on
the Modems icon. Then click on the Properties button of the
Modems Properties dialog box. Reset the “Maximum Speed” as
needed. A speed of 320,400 bps improves performance
significantly without complications in most cases.