Minolta PAGEWORKS 20 - Manual (Page 123)

6-1
Chapter 6
Installing Options
- Take the tray unit out of the shipping box.
- Remove the plastic bag and all shipping materials.
- Turn the printer off and then disconnect the power cord and inter-
face cable from the printer.
1. Place the tray unit in the location
you have chosen.
Pull out the paper tray before-
hand.
2. Set the printer onto the third tray
unit using the coupling pins as a
guide.
Since the printer weighs approxi-
mately 55.1 lbs (25 kg), two peo-
ple are required to lift it.
3. Load paper you want to print.
→
See “Loading Paper in Tray 3”
page 3-33.
4. Slide the paper tray into the tray
unit.
1. Installing the Third Tray Unit
NOTE
Options6.frm 1 ページ ２００３年１１月１８日 火曜日 午前９時５２分