5) parallel menu – Minolta PAGEWORKS 20 User Manual
Page 64
3-14
Ch
ap
te
r 3
U
s
ing Y
our
Pr
inter
(5) Parallel Menu
IO BUFFER SIZE
Selects the receiving buffer size. If AUTO is selected, the printer
automatically sets the buffer size depending on the amount of
memory carried in the printer.
HIGH SPEED
Sets whether it transfers data at high speed. Basically, you don’t
need to change the setting. However, depending on the PC you are
using, you may not be able to run at high speed. In such a case, set
the setting to OFF.
BI-DIRECTION
Sets whether to enable bi-directional communication. Basically,
you don’t need to change the setting. However, depending on the
PC you are using, it may not support bi-directional communica-
tion. In such case, set the setting to OFF after verifying the PC
specification.
IO BUFFER SIZE
HIGH SPEED
BI-DIRECTION
TIMING
ADOBE PROTOCOL
TIME OUT
AUTO
ON
ON
A-B-A
STANDARD
60
16K, 64K, 256K, 1M
AUTO
OFF
ON
OFF
ON
A-B-A
A-B
B-A
STANDARD
BINARY
TBCP
5 to 300
ITEM
FACTORY DEFAULT
USER SELECTION
2. Understanding the Printer Menus
OperatW3.frm 14 ページ ２００３年１１月１８日 火曜日 午前９時５１分