Minolta PAGEWORKS 20 - Manual (Page 135)

6-13
Chapter 6
Installing Options
7. Make sure both metal clips on the
connector are pushed through the
holes on the SIMM.
8. If installing a second SIMM,
repeat steps 6 to 7.
9. Close the metal cover and tighten
the four screws.
Attach the right side cover.
10. Close the upper cover.
11. Connect the power cord to the
printer and then turn the printer
on.
→
See “Connecting the power
Cord” page 2-9.
→
See “Turning the Printer ON
and OFF” page 2-10.
5. Installing the SIMM
Options6.frm 13 ページ ２００３年１１月１８日 火曜日 午前９時５２分