Minolta PAGEWORKS 20 - Manual (Page 126)

6-4
Chapter 6
Installing Options
4. Connect the power cord to the
printer and then turn the printer
on.
→
See “Connecting the power
Cord” page 2-9.
→
See “Turning the Printer ON
and OFF” page 2-10.
5. Print a config print and verify the
Duplex Unit setting in the
Installed Options.
→
See “Test Print” page 3-19.
2. Installing the Duplex Unit
Installed Options
Third Tray Unit = Not Installed
Duplex Unit = Installed
Network Card = Not Installed
PostScript ROM = Not Installed
Hard Disk = Not Installed
Add SIMM Memory (MB) = 0
Options6.frm 4 ページ ２００３年１１月１８日 火曜日 午前９時５２分