Minolta PAGEWORKS 20 - Manual (Page 39)

2-9
Ch
apt
er
2
Setting Up
Connect the power cord according to the following procedure.
1. Make sure that the power switch
of the printer is placed in the ❍
(OFF) position.
2. Plug one end of the power cord
into the printer’s power cord
socket and plug the other end of
the power cord into the power
outlet.
4. Connecting the Power Cord
Setting2.frm 9 ページ ２００３年１１月１８日 火曜日 午前９時５２分