Minolta PAGEWORKS 20 - Manual (Page 52)

3-2
Ch
ap
te
r 3
U
s
ing Y
our
Pr
inter
Tray 1 Paper Size Setting Method
You can enter the tray1 paper size setting mode only from off-line.
1. Press the On Line key to take the printer off-line.
2. Press the Tray1 Paper key to enter the tray 1 paper size setting
mode.
3. Press the Select key as many times as necessary to select the
paper size you want to specify.
4. Press the Enter key to save your selection.
An asterisk (*) appears at the right of the setting.
The printer returns on-line automatically.
The paper sizes displayed in the tray 1 paper size setting mode are
as follows.
- If the paper in tray 1 has been used up, reload the paper and the
printer resumes printing automatically.
- If you select UNIVERSAL , the printer feeds paper from tray 1 irre-
spective of the paper size setting on the computer only when you
specify tray 1 as the paper source.
- If you select JOB SEPARATION , tray 1 becomes the separator
source.
TRAY1 PAPER SIZE LETTER LETTER, LEGAL,
LEDGER, EXEC, C5,
DL, MONARC, COM10,
A4, A3, A3+, B4,
JIS B5, ISO B5,
UNIVERSAL,
JOB SEPARATION
ITEM FACTORY DEFAULT USER SELECTION
1. Using the Control Panel
OperatW3.frm 2 ページ ２００３年１１月１８日 火曜日 午前９時５１分