Minolta PAGEWORKS 20 - Manual (Page 41)

2-11
Ch
apt
er
2
Setting Up
To make sure the printer works correctly before connecting the
printer to the computer, print a configuration page according to the
following procedure.
1. Load Letter paper into tray 1.
→
See “Loading Paper in Tray 1”
page 3-29.
2. Using the control panel, select
TEST PRINT from the menu
mode. Select CONFIG PRINT
from the item mode. Press the
Enter key to start printing.
→
See “Test Print” page 3-19.
3. If an error message appears, see
“Understanding Printer Mes-
sages” on page 5-12 for more
information.
6. Printing a Test Page
Setting2.frm 11 ページ ２００３年１１月１８日 火曜日 午前９時５２分