Manitowoc Ice CM MODEL STH003 - Manual (Page 21)

21
OPERATIONAL CHECKS
Routine adjustments and maintenance procedures
outlined in this manual are not covered by the warranty
WATER INLET VALVE
The water inlet valve energizes in the harvest cycle.
The water level will rise and flow out the overflow tube
and down the drain. Verify the overflow tube is in
place in the water trough. The water level is not
adjustable.
BIN THERMOSTAT ADJUSTMENT
The bin thermostat stops the ice machine when the bin
is full. Turn the thermostat to the left to decrease the
level of ice in bin or to the right to increase the level of
ice in bin.
POWER BUTTON (GREEN)
Pressing the “Power” button once will energize
the ice machine and green Power light. Pressing
the “Power” button a second time will de-energize
the ice machine.
CLEAN (GREEN)
Pressing the “Clean” button will initiate a clean
cycle. The clean light will flash during the clean
cycle for one minute to indicate the proper time to
add ice machine cleaner or sanitizer.