Muratec F-65 - Manual (Page 12)

Important: Some of the functions we’ll mention, here, are covered in the “Beyond
the basics” section, which begins on page 2.1.
1 Liquid crystal display ( LCD ) — The display (1-line × 16-character) which
shows the machine’s status and lets you see what you’re entering during vari-
ous operations. (If the
LCD is blank, the machine is off.)
2 COM - OPTIONS — Use this key to choose from among six fax options:
Broadcast, delayed transmission, relay broadcast initiation, polling, F-code
transmission or F-code polling.
3 and — Use these keys to scroll through features and command options
as displayed on the LCD .
4 PROGRAM — Press this key and enter a function number to access your
machine’s programs.
5
MEMORY RECEIVE light — If glowing, indicates your fax machine is receiving
an incoming fax document into the machine’s electronic memory.
6 ENTER — ENTER is a “Go!” key. When pressed, it confirms user settings,
begins operations and moves through command levels.
RESOLUTION — When a document is in the document feeder, press this key to
toggle among the three resolution modes and the halftone (grayscale) mode.
When neither the
S - FINE , FINE nor HALFTONE LED (light-emitting diode) is
glowing, your machine is set for normal resolution.
1.4
Getting started
What do the keys do?