Muratec F-65 - Manual (Page 60)

Printing a document received in an F -code box
When your machine receives a document via ITU - T sub-addressing from another fax
machine, your machine will print a message alerting the person for whom the docu-
ment is intended. Then the person has a certain number of days in which to print
out the message before your machine erases it. (see step 13, on page 2.23)
Note: For this operation to work, two things must be true:
•You must know the F -code box’s two-digit number.
•You must know the four-digit I . D . code for the F -code box.
To print a received message from an F -code box:
1 Press PROGRAM , E , 3. The display shows:
2 Press ENTER .
If this box holds the document you want to print, skip to step 4.
If not, go on to step 3.
3 Use the numeric keypad to enter the two-digit number (01-10) of the F -code
box currently “holding” the document you want to print. We enter 03.
4 Press ENTER . The display will show:
Note: If the F -code box is holding no documents at this time, the LCD shows
this briefly before returning to step 3:
In step 3, be sure to select an F -code box that is holding at least one
document.
5 Use the numeric keypad to enter your F -code’s four-digit I . D . code.
Here we enter 2345:
6 Press ENTER .
• If you enter the correct I . D . code, your fax machine will print all documents
in this F -code box and then erase them.
• If you enter an incorrect I . D . code, your fax machine will refuse to print the
document.
F
-code transmission and polling
With F -code, your machine can send secure transmissions to other manufacturers’
machines, and perform polling from other makers’ machines, as well. You can do
this in one of two ways:
• Press a programmable one-touch key programmed for sub-address sending. (See
“Programmable one-touch key,” on pages 2.32-2.35)
. . . or . . .
• Enter the ITU - T subaddress and password directly, which is what we will now
describe.
Note: For F -code communication to occur, three things must be true:
• The remote fax machine must support ITU - T sub-addressing (and pass-
word) capabilities.
• A mailbox ( F -code box) with an ITU - T subaddress must exist on the remote
fax. (It does not have to have an ITU - T password.) If the other machine
doesn’t have not at least one box with a subaddress, F -code communication
will be impossible.
• You must know the ITU - T subaddress and (if applicable) password informa-
tion for the mailbox ( F -code box) on the remote machine.
F -code transmission
Sending a document with ITU - T subaddress / password
1 Insert the document. Adjust resolution and contrast if necessary.
2 Press COM - OPTIONS five times.
3 Press ENTER . The LCD shows briefly:
then it will show:
4 Use the numeric keypad to enter the appropriate subaddress number.
In this example, we enter 123456.
5 Press ENTER . The LCD shows briefly:
123456_
_
Enter SubAddress
5.F-Code Tx
I.D. Code :2345
No Doc. Stored
I.D. Code :****
03:Muratec Offic
01:Bookkeeping
Print F-Code Doc
Beyond the basics
2.25