Muratec F-65 - Manual (Page 75)

3 Use the numeric keypad to enter the four-digit passcode. In our example
here, we enter 6296.
Note: If you enter an invalid passcode, the machine’s security feature will
abort the operation.
4 Press ENTER .
5 If the setting you see is acceptable, skip to step 7.
If not, go on to step 6.
6 To change the setting, press or repeatedly until the setting you want
appears. In this example, we chose “Mode1.”
7 Press ENTER .
Autodialing while using the PIN mask
Note: The following instructions presume you are familiar with how to set and use
your machine’s autodialer. If you need to review, see pages 2.7–2.13.
Note: If the PIN mask feature is off, you use the autodialer normally.
If you specified “Mode 1”
In this mode, before autodialing a number for the first time, you must add the PIN to
its stored one-touch key or speed-dial number. Here’s how:
1 Use the EasyDial directory to enter a name.
The
LCD shows:
2 Use the numeric keypad to enter the four-digit passcode. Here, we will use
our sample passcode again.
3 Press ENTER . The LCD shows briefly:
and then it shows:
4 Use the numeric keypad (including either * or #, if necessary) to enter the
desired PIN , up to eight characters in length.
5 Press ENTER to save the PIN .
Note: If you press ENTER without entering the PIN , the fax machine beeps,
indicates “Invalid Number” on the LCD and then returns you to step 4.
Now you may autodial the number as usual.
Important: While in PIN Mode 1, any autodialer numbers you use must include
the PIN . This also applies to autodialer numbers used with
programmable one-touch keys (see pages 2.28–2.35).
If you specified “Mode 2”
In this mode, you do not have to add the PIN to the autodialer setting. Instead, you
enter the PIN manually each time you autodial:
1 Enter a speed-dial number.
Here, we have enter speed-dial number 01:
2 Press START . (If you used a one-touch key, you don’t need to press START .) The
LCD shows briefly:
and then it shows:
The machine now asks for the PIN .
3 Use the numeric keypad to enter the PIN .
4 Press ENTER . Your machine will dial the number.
1057_
_
Enter PIN Number
S01_
1057_
_
Enter PIN Number
Passcode :6296
Passcode :****
PIN Mode: Mode1
PIN Mode: Off
Passcode :6296
Beyond the basics
2.40