Muratec F-65 - Manual (Page 57)

Note: If you enter an invalid I . D . code, the fax machine will reject the
attempt and abort this operation.
6 The LCD now shows briefly:
then it will show either:
or
The machine is now prompting you for a name for this F -code box.
If you want to enter or change this F -code box’s name, proceed to step 7.
If you do not want to enter or change this box’s name, skip to step 8.
7 An F -code box’s name may be up to 16 characters in length. You enter the
name the same way you entered your fax name during EasyStart. We will
review the process, here.
On the LCD , you will see the char-
acter set currently available, such
as:
To find a different character,
press 2 or 8 repeatedly to scroll
through character sets until you
see the one you want.
If you need to insert a space, one
can be found before and after
each set of characters.
When you see the character you want:
• Press either 4 or 6 to move the cursor to the character you want.
• Then press 5 to enter that character and move on to the next entry.
Note: If you make a mistake, just press CANCEL to erase to the left. Then
continue to enter the character(s) you want.
Note: As you enter characters, the LCD will scroll to the left so you can view
entries longer than five characters.
8 Press ENTER to save the box’s name.
The LCD shows briefly:
then it will show either:
or
The machine is asking for this F -code box’s ITU - T subaddress.
You must enter a subaddress here in order to use this F -code box, and anyone
trying to fax to this F -code box must know it.
To enter or change the subaddress number, proceed to step 9.
If you do not want to change an existing subaddress number, skip to step 10.
9 Use the numeric keypad to enter the exact subaddress for this F -code box.
Note: The subaddress must be unique to this F -code box; i. e., no other
F -code box in this fax machine can have the same subaddress.
This ITU - T subaddress can be up to 20 characters in length and can include
any combination of numbers and the * and # symbols (but no other non-
numerical characters). In this example, we enter 6*54321#.
Note: To erase previously entered numbers, press CANCEL to erase to the
left. Or to change just one character in the number, press to move
the cursor to the left, or to move it to the right, to that character
Press CANCEL to erase it. Then re-enter the number until it is just as
you want it.
10 Press ENTER to store it.
Note: If you entered a sub-address number already being used by another
F -code box, the machine will beep and briefly display the following:
The machine now returns you to step 9. Enter a different number for
your
F -code box’s subaddress.
Sub-Addr. In Use
6*54321#_
123456_ _
03:Sub-Address#
_ABCDEF >
_ABCDEF > Murat _ABCDEF >
01:Box Name
Beyond the basics
2.22