Muratec F-65 - Manual (Page 61)

then it will show:
Note: If you know that this subaddress does not have a password, skip to
step 7.
6 Use the numeric keypad to enter the appropriate password.
In this example, we enter 654321.
7 Press ENTER . The LCD shows briefly:
then it will show:
8 Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad.
Do not press
START .
9 What you do now depends upon when you want the transmission to begin.
• To have it begin now, skip to step 12.
• To delay it, proceed to step 10.
10 Press COM - OPTIONS , COM - OPTIONS , ENTER . The LCD shows:
11 Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER .
12 Press START .
If you chose an immediate transmission in step 9, your fax machine will begin
dialing. If you chose a delayed command, the machine will display
“
** Reserved ** ” on the LCD , indicating that the machine has stored the
command in memory and will perform it later.
Note: The ITU - T subaddress and password can be up to 20 characters in length and
can include any combination of numbers and the * and # symbols. Do not
include other non-numerical characters.
Note: To change a number you have already entered:
— Press to move the cursor to the left or to move it to the right, to
that character.
— Press CANCEL to erase the character.
— Enter the digit(s) you want.
F -code polling
Polling with ITU - T subaddress / password:
1 Press COM - OPTIONS six times.
2 Press ENTER . The LCD shows briefly:
then it will show:
3 Use the numeric keypad to enter the appropriate subaddress.
In this example, we enter 123456:
4 Press ENTER . The LCD shows briefly:
then it will show:
5 Use the numeric keypad to enter the appropriate password number.
In this example, we enter 654321.
Note: If you know that this sub-address does not have a password, skip to
step 6.
654321_
_
Enter Password
123456_
_
Enter SubAddress
6.F-Code Polling
Time: 15/17:05
_
Enter Fax Number
654321_
_
Enter Password
Beyond the basics
2.26