Muratec F-65 - Manual (Page 39)

Beyond the basics
2.4
Setting the copy parameters
You can set two parameters for copying:
• Copy reduction rate — Works the same way as the print reduction rate (see page
2.3 for more details).
• Reduction margin — Serves the same purpose as the reduction margin for print-
ing (see page 2.3 for more details).
Note: The same options are available for copy reduction as for print reduction. (If
necessary, review “Setting the print parameters,” on page 2.3.)
1 Press PROGRAM , J , 0, 3. The LCD shows:
2 Press ENTER . The LCD shows the current copy reduction rate:
If the setting you see is acceptable, skip to step 4.
If not, go on to step 3.
3 To change the setting, press or repeatedly until the reduction setting
you want appears. In this example, we chose 75%.
4 Press ENTER to save the setting. The LCD shows the current reduction margin:
If the setting you see is acceptable, skip to step 6.
If not, go on to step 5.
5 To change the setting, use the numeric keypad to enter the reduction margin
you want. If necessary, press
or to move the cursor.
In this example, we chose 00 mm.
6 Press ENTER to save the setting.
Setting the number of rings
You can set the number of times your fax machine will ring before answering a call.
1 Press PROGRAM , J , 0, 6. The LCD shows:
2 Press ENTER .
If the setting you see is acceptable, skip to step 4.
If not, go on to step 3.
3 To change the setting, use the numeric keypad to enter the number of rings
you want. You can choose from one to nine rings. Here, we chose four rings.
4 Press ENTER to save the setting.
Note: If you enter 0 (zero), the machine will beep briefly to warn you that it
cannot accept that setting.
Setting ECM
Static on a phone line during a call may ruin your attempts to communicate via fax.
This is because “line noise” can easily disrupt the flow of data from one fax machine
to another.
That’s why your fax machine gives you the chance of operating in Error Correction
Mode (
ECM ). When two fax machines communicate while running in ECM , the send-
ing machine automatically checks the data, block by block, as it sends. If the
receiving fax machine cannot verify the transmission, the first machine will re-send
the information.
Note: While using ECM gives you a better chance of getting a fax document
through a troublesome phone line, it could also slow down the transmission
time. That’s why we let you turn
ECM on or off as you require.
Note: Not all fax machines have ECM . If you have activated ECM and then transmit
to a fax machine not currently using ECM , there will no change in the fax
transmission from a usual, non- ECM transmission.
# (1-9) : 4
# (1-9) : 2
Set # Of Rings
Margin(0-85): 00
Margin(0-85): 24
Reduc Rate : 75%
Reduc Rate :100%
Copy Parameters