Moog DS2100 - Manual (Page 14)

DS2100 User's Manual (Preliminary)
SECTION 3: WIRING AND INSTALLATION
PAGE 3-8
3.1.6 Brushless Servo motors
The DS2100 series Servo-drive is compatible with Moog brushless servomotors.
Normal connection to the motor requires two cables - a power and a signal cable. The power cable provides three-phase
stator power, protective earth and brake connections. The signal cable carries position transducer feedback signals and
motor temperature detection connections.
3.1.6.1 Brushless Motor Brake 24V Power Supply
The motor brake requires a 24V
dc
supply for release. This should be rated to cover at least twice the sums of the rated
currents of all brakes connected.
3.1.7 Heatsinks and Climatic Control
The need for air conditioning will depend on the duty cycle of the system and the surrounding ambient temperature. The
maximum allowable ambient temperature is 40°C (104°F). The humidity range is 5-95% non-condensing.
All DS2100 Servo-drives incorporate internal cooling fans and integral heat sinks. Other than controlling ambient
conditions, additional heat sinking is not required.