Moog DS2100 - Manual (Page 63)

SECTION 3: WIRING AND INSTALLATION
DS2100 User's Manual (Preliminary)
PAGE 3-57
3.12 DS2100 Control Input and Outputs
The following section contains a description of the control related Input/Output (I/O) available to the user. Functionality
of this I/O is detailed later in this manual.
Digital
Inputs
Digital
Outputs
Drive
Ready
Figure 3.40 DS2100 I/O Connections
NOTE - An external 12Vd.c. to 32Vd.c. power source (user supplied) is required for the I/O
functions. The amperage rating of this power source will depend on the number of I/O
functions used. Supply currents can be calculated as a function of this number and the input
and output impedances quoted below.