Moog DS2100 - Manual (Page 46)

DS2100 User's Manual (Preliminary)
SECTION 3: WIRING AND INSTALLATION
PAGE 3-40
- Fixed connector: 10 pins, male connector
- Mating connector, 10 pins, female, supplied with the drive. Phoenix Contact (Part # PC4 HV/10-ST-7.62)
- A size wiring: cable 14AWG (2.1 mm 2 ). Wire stripping: 7 mm
- B size wiring: cable 14AWG (2.1 mm 2 ). Wire stripping: 7 mm
- Tightening torque: 0.5Nm.
Pos. Name Function
J6.2 DC+ DC Bus (+)
J6.3 RR Regeneration Resistor
Table 3.15 J6, Regeneration Resistor connector, A,B Size
3.10.3 C Size Regeneration Resistor connection
Tie screen to
panel on
which resistor
is mounted.
Tie Screen to
chassis via EMC
bracket. See
Section 2
Installation
J6.4 J6.5
DC+(RR) RR
Connector J6
DS2100 C
Recovery
Resistor
Figure 3.27 DS2100 Size C External Regeneration Connections
- Fixed connector: 5 pins, male connector
- Mating connector, 5 pins, female, crimped supplied with the drive. (Molex 42816-0512)
- C size wiring: cable 8 AWG (8.4 mm 2 ).
Pos. Name Function
J6.4 DC+(RR) DC Bus (+)
J6.5 RR Regeneration Resistor
Table 3.16 J6, Regeneration Resistor connector, C Size