Maytag MAH9700AW* - Manual (Page 32)

32 16025909 Rev. 0 ©2005 Maytag Services
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
Disassembly Procedures
WARNING
!
8. Lift Front Panel from bottom brackets.
Boot Removal
1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Remove Console.
4. Remove Front Panel.
5. Loosen boot clamp at the 12 o’clock position.
NOTE: When installing the boot align the index tabs on
the boot with the screws on either side of the Fill
Tube.
Heater Removal
1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Remove Console.
4. Remove Front Panel.
5. Remove Thermistor and Heater wiring connectors.
6. Loosen 10mm nut on Heater and remove Heater
Element.
NOTE: Install Heater Element on top of metal bracket.