Warning, Disassembly procedures – Maytag MAH9700AW* User Manual
Page 39
Advertising
©2005 Maytag Services
16025909 Rev. 0
39
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
Disassembly Procedures
WARNING
!
23. Set the tub on the floor. Position 4" wood blocks or
equivalent around the spinner shaft. Roll the tub to
the upright position and rest it on the blocks.
.
24. Remove the 10mm screws around the perimeter of
the tub.
NOTE: Torque tub bolts to 6-11 ft. lbs.
25. Separate the front and rear halves of the Outer Tub.
26. Tub Gasket can be replaced after tub halves are split.
Advertising