IBM 6C4 - Manual (Page 105)

When a device type is selected, such as item 1, a Select Task menu will be displayed.
The following is an example of that menu for a hard disk.
Select Task
SCSI 18200 MB Harddisk (loc=U0.1-P2/Z1-A8,0)
1. Information
2. Set Boot Sequence: Configure as 1st Boot Device
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Selecting Information will display a menu similar to the following for a hard disk.
Device Information
/pci@3fffdf0a000/pci@2,4/scsi@1/sd@8,0
: (Integrated) (Bootable)
DEVICE : SCSI 18200 MB Harddisk ( loc=U0.1-P2/Z1-A8,0)
NAME : sd
DEVICE-TYPE : block
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
The Set Boot Sequence option allows you to set the location of the device in the boot
list.
Chapter 4. Using System Management Services 87