Front view of cd-rom drive, Understanding the status lights – IBM 6C4 User Manual
Page 39
Front View of CD-ROM Drive
1 Compact Disc Tray
2 Emergency Eject Hole
3 Load/Unload Button
4 Status Light
5 Volume Control
6 Headphone Jack
Understanding the Status Lights
The status lights indicate the operational status of the drive. The various conditions are
as follows:
If light is:
Condition is:
Off
Drive is in standby mode with or without a disc loaded.
Blinking (green)
Any of the following:
v
Drive tray is inserted. The light blinks while the drive
completes the initialization checkout.
v
Drive is reading data. The light blinks while data is being
read.
v
Drive is in Play Audio Mode. The light blinks while the audio
is playing.
On (amber)
Hardware error condition found during initialization.
Note: If this occurs, contact your service representative.
1
2
5
6
4
3
Chapter 2. Using the System
21