Customer account setup menu, Call-out test menu – IBM 6C4 User Manual
Page 75
Customer Account Setup Menu
This menu allows users to enter information that is specific to their account.
Customer Account Setup Menu
1. Customer Account Number:
Currently Unassigned
2. Customer RETAIN Login userid:
Currently Unassigned
3. Customer RETAIN login password:
Currently Unassigned
98. Return to Previous Menu
0>
v
Customer Account Number is assigned by your service provider for record-keeping
and billing. If you have an account number, enter it. Otherwise, leave this field
unassigned.
v
Customer RETAIN Login User ID and Customer RETAIN Login Password apply
to a service function to which your service provider might have access. If your
service provider does not use RETAIN, leave these fields unassigned .
Call-out Test Menu
Tests the configuration after the modem is installed and configured. In order for this test
to execute successfully, at least one of the following numbers must be assigned:
v
Service center telephone number
v
Customer administration center telephone number
v
Digital pager telephone number
Service Processor Parameters in Service Mode (Full System Partition)
When the system is in service mode, the following service-processor parameters are
suspended:
v
Unattended Start Mode
v
Reboot/Restart Policy
v
Call-Out
v
Surveillance
When service mode is exited, the service processor parameters revert to the customer
settings.
Chapter 3. Using the Service Processor
57