IBM SC30-3865-04 - Manual (Page 112)

Table 3. APPN Configuration Command Summary (continued)
Command Function See page:
Delete Deletes the following:
v Port port name
v Link-station link station name
v LU-Name LU name
v Connection-network connection
network name
v Connection networks port interface (CN
PORTIF)
CN name
v Mode mode name
v Focal_point
v local-pu
v Routing_list
v COS_mapping_table
192
List Lists the following from configuration
memory:
v All
v Node
v Traces
v Management
v HPR
v DLUR
v Port port name
v Link-station link name
v LU-Name LU name
v Mode mode name
v Connection-network connection
network name
v Focal_point
v Routing_list
v COS_mapping_table
193
Activate_new_config Reads the configuration into non-volatile
configuration memory. 193
TN3270 Accesses the TN320E config> command
prompt
194
Exit Returns you to the previous command
level. See “Exiting a Lower Level
Environment” on page xxvii.
Note: APPN will respond to a dynamic reset command at the interface level.
APPN Configuration Commands (Talk 6)
82 MRS V3.2 Protocol Config Ref Vol 2
||
| |