IBM SC30-3865-04 - Manual (Page 194)

Table 24. Configuration Parameter List - Station Configuration for ATM (continued)
Parameter Information
Parameter
Backward Peak Cell Rate
Valid Values
1 - 85% of line speed
Default Value
Taken from the port definition
Description
This parameter indicates an upper bound on the cell transmission rate.
Parameter
Backward Sustained Cell Rate
Valid Values
1 - 85% of line speed
Default Value
Taken from the port definition
Description
This parameter indicates an upper bound on the average cell transmission rate. You
cannot specify this parameter for Best Effort connections.
Parameter
Backward Tagging
Valid Values
Yes, No
Default Value
Yes
Description
This parameter indicates that cells that are nonconforming to cell loss priority 0 traffic
specification but are conforming to cell loss priority 1 traffic specification are marked
and allowed into the ATM network. You cannot specify this parameter for Best Effort
connections.
APPN Configuration Commands
164 MRS V3.2 Protocol Config Ref Vol 2