IBM SC30-3865-04 - Manual (Page 392)

packets are not forwarded to any routers that are reached via that interface.
Also, incoming NHRP frames are discarded.
Note: Any explicit interface definitions override the “NHRP
enabled/disabled” box-level setting.
Example: add int
Interface Number [0]?
Enable NHRP [Yes]:
exclude list
Adds an exclude list entry. Specify a protocol address which must be
excluded from the NHRP network. This option adds an exclude list entry
and prompts you to add the exclude list entry to the disallowed
router-to-router shortcuts. See “NHRP Access Controls” on page 357 for
more information.
Valid values: IP address and mask.
Default: Empty.
Example: add exc
IP Address [0.0.0.0]? 6.6.6.5
Address Mask [255.255.255.255]?
Deny Shortcuts[Yes]?
Record added to Disallowed Router-to-Router Shortcuts
Record added to Exclude List
disallowed router-to-router shortcuts
Adds a router protocol address to which shortcuts are not allowed.
See “Disallowed Router-to-Router Shortcuts” on page 355 for more
information.
Example: add dis
IP ADDRESS [0.0.0.0]? 8.8.8.1
Address Mask [255.255.255.255]?
Valid values: IP address and mask.
Default: Empty.
Delete
Use the delete command to delete an interface definition for NHRP, an exclude list
entry, or disallowed router-to-router shortcuts.
Syntax:
delete interface definition for NHRP
exclude list
disallowed router-to-router shortcuts
interface definition for NHRP
Deletes an explicit NHRP interface definition.
Example: del int
Interface Number [0]?
NHRP Advanced Configuration Commands (Talk 6)
362 MRS V3.2 Protocol Config Ref Vol 2