IBM SC30-3865-04 - Manual (Page 237)

Table 47. Configuration Parameter List - Delete TN3270E Map
Parameter Information
Parameter
Client IP address or Network address
Valid Values
Any valid IP address
Default Value
0.0.0.0
Description
This parameter specifies the IP address of the client or network map definition to be
deleted.
Parameter
Client IP address or Network address Mask
Valid Values
Any valid IP address mask
Default Value
0.0.0.0
Description
This parameter specifies the IP address mask of the client or network map definition to
be deleted.
Parameter
Delete all entries for this client?
Valid Values
Yes or No
Default Value
No
Description
This parameter specifies whether the entire pool or a specific name is to be deleted.
Parameter
Pool name
Valid Values
A string of 1 to 8 characters:
v First character: A to Z
v Second to eighth characters: A to Z, 0 to 9
Default Value
None
Description
This parameter specifies the LU name or pool name to be deleted.
Syntax:
delete port
This command deletes port definitions. You will be prompted to
enter values for the following parameters. The parameter range will
be shown in parentheses ( ). The parameter default will be shown
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 207
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
||
|
|
|