Integra DTR-9.1 - Manual (Page 41)

41
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About
Select: Exit:|EXIT|
Enter:|ENTER| Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
2.Input Setup
Input:VIDEO3
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Listening Mode Preset
5.Sound Effect
6.Character Input
7.Miscellaneous Setup
Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
127456789012345678901234
2-7.Character Input
Input:VIDEO3
a.Character Display
:Yes
b.Character
:
Press to Edit.
Press to clear.
Quit:|OSD|
Input Setup
10-character
space field
2-7. Character Input sub-menu
This sub-menu allows you to give names to the stations
you have preset for the AM/FM tuner, and to the input
sources you have connected (excluding the tuner
itself). Up to 10 characters can be entered for each
name. For example, if you have a DVD connected to
the VIDEO5 input jack, then you can give it the name
“DVD2.” Or, if you have multiple VCRs connected, you
can enter the model names or manufacturer names for
each one so that you do not have to remember which
is connected to which input source.
a. Character Display
Yes: Select to display the name you enter when the in-
put source is selected.
No: Select to display the default name.
b. Character
If you have selected “Yes” for the Character Display
above, then here you can enter the name that you
want to display. Press cursor button to clear the cur-
rent entry. Press cursor button to bring up the Char-
acter Input screen.
At the Character Entry screen, press the cursor buttons
to move the cursor to the desired character and then
press the ENTER button. That character will now appear
in the 10-character space field above. Continue until
the name is finished or until you have reached 10 char-
acters.
Using the cursor buttons, select the desired character
and press the ENTER button. To change a character,
move the cursor backward with the EXIT button or for-
ward with the ENTER button to the location of mistaken
character and enter the desired character. To erase a
character, enter a blank space in its place. After com-
pleting the name, to exit, repeatedly press the ENTER
button. Continue until the name is finished or until you
have reached 10 characters.
2-8. Miscellaneous Setup
This sub-menu allows you to set some of the special
features offered by the DTR-9.1.
a. IntelliVolume
When switching input sources, you may find that the
output level for different components or input sources
connected to the DTR-9.1 is different even though the
main volume setting is the same. Under normal circum-
stances, you would then have to change the volume
setting each time you change the input source. This
IntelliVolume setting allows you to preset a volume
level for each input source separately so that when you
do switch from one input source to another, the DTR-9.1
adjusts the volume accordingly so that the resulting vol-
ume stays the same. To set the IntelliVolume, simply se-
lect an input source at the front panel, and if that
source is quieter than other sources, increase its deci-
bel level with the cursor button, or if it is louder than
other sources, decrease its decibel level with the cur-
sor button.
The intelli volume can be adjusted between -12 and
+12 decibels.
b. 12V Trigger
Here you can set the condition of the 12V TRIGGER ter-
minals for each input source.
Off:Select to have no output from either terminal A or B.
A: Select to have output from terminal A only.
B: Select to have output from terminal B only. With ter-
minal B, to avoid problems that may occur if the ex-
ternal device is turned on simultaneously, the output
is delayed by 2 seconds.
A+B:Select to have output from both terminals A and B.
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About
Select: Exit:|EXIT|
Enter:|ENTER| Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
2.Input Setup
Input:VIDEO3
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Listening Mode Preset
5.Sound Effect
6.Character Input
7.Miscellaneous Setup
Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
2-7.Character Input
Input:VIDEO3
b.Character
:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
|ENTER| 0123456789-.’
Back: ()+*/=,:;!?_
|EXIT|
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About
Select: Exit:|EXIT|
Enter:|ENTER| Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
2.Input Setup
Input:AM
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Listening Mode Preset
5.Sound Effect
6.Character Input
7.Miscellaneous Setup
Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
2-8.Miscellaneous Setup
Input:AM
a.IntelliVolume
: 0dB
b.12V Trigger
: off
Quit:|OSD|