Using remote controller, Using the remote controller to control each device, Press the audio/tape mode button – Integra DTR-9.1 User Manual

Page 56: Controlling the dtr-9.1, Audio” appears in the remote controller display

Advertising
background image

56

Using remote controller

Overview
The RC-418M remote controller is a useful tool to help
you operate the components of your home theater. To
do so, first press the MODE button that corresponds to
the device you wish to control. At this time, the display
on the remote controller will change to show the com-
ponent that is selected. Then simply press the desired
operation button and the component will operate ac-
cordingly. For example, if you wish to select the CD in-
put source at the DTR-9.1 with the remote controller,
first press the AUDIO/TAPE MODE button to select the
DTR-9.1 (“AUDIO” will appear on the display) and then
press the CD (INPUT SELECTOR) button.

Using the remote controller to control each
device

In order to use the remote controller, you must first turn
on the POWER switch at the DTR-9.1 so that it enters
standby mode.

1. Press the AUDIO/TAPE MODE button.

“AUDIO” appears in the remote controller display.

2. Press the POWER ON button to turn on the DTR-

9.1 and press the POWER STNBY button to put it
back in the standby mode.

When you press the POWER STNBY button on the re-
mote controller, it puts the DTR-9.1 in the standby
state but does not turn it completely off.

SEND/LEARN indicator
This indicator acts as a guide when commands are pro-
grammed into or sent by the remote controller. It also
warns the user when an error is made or battery power
is low.

Controlling the DTR-9.1

If “AUDIO” is already appears in the display, proceed
to step 2.

1. Press the AUDIO/TAPE MODE button.

“AUDIO” appears in the remote controller display.

2. Press the desired operation button. The

buttons shaded in the figure to the left are the
operation buttons that can used to control the
DTR-9.1.

SEND/LEARN

indicator

POWER ON

AUDIO/TAPE

MODE

POWER
STNBY

OPEN/COLSE

REC

AUDIO

MUTING

DISC

TRACK

DVD

CD

PH

TUN

T2

T1

V1

STEREO

1

2

3

6

5

4

7

+ 10

0

ENT

8

9

SURROUND

THX

DSP

LEVEL +

CH SEL

Re-EQ

LEVEL –

DIMMER

LATE NIGHT

DIRECT

DSP

V2

V3

V –

POWER ON

AUDIO/TAPE

MODE

POWER STNBY

VOL

DISPLAY

CH

Re-EQ

LATE NIGHT

DIMMER

SLEEP

LIGHT

TEST
MUTING

OPEN/CLOSE

INPUT
SELECTOR
buttons

Listening
mode buttons

LEVEL +
LEVEL –

CH SEL

HOME THEATER CONTROLLER

RC-418M

Advertising