Connecting the keyboard, mouse, and peripheral dev – Iomega 9000 Series User Manual
Page 13
6 Advantage! 9000 Series User’s Manual
To connect a monitor to the computer:
1.
Set up your monitor according to the instructions that
accompany it.
2.
Connect the monitor interface cable to the video port on
the back of the computer (Figure 1), or to the add-in video
connector if you have installed a video adapter.
3.
To use a multifrequency monitor in standard VGA mode,
set the monitor to analog mode.
4.
Plug the monitor power cord into a grounded outlet.
Figure 1. Video Port Location
Connecting the Keyboard, Mouse, and
Peripheral Devices
If a plastic cap covers the end of the keyboard cable, remove it.
Plug the keyboard and mouse into their connectors at the back
of the computer. Be sure that the arrows on the cable plugs point
to the right as you face the rear of the system.
3694manl.bk : 3694manl.fm Page 6 Tuesday, December 24, 1996 9:15 AM